Enter a new 4 digit code using numbers from 0 to 9 only. The default setting is ‘4020’ for 4 digit option, or ‘402000’ for 6 digit option. A new Installer’s Code can be programmed. Electronic security systems, burglar alarm systems and fire alarms for commercial businesses worldwide.After configuration is finished, the keypad advances to GET ZONES. At INST CODE, enter the DSC panel installer code and press CMD. Advance to DSC SETUP and press any select key or area. At the communicator keypad, enter 2313 (DIAG) and press CMD. Ensure the DSC panel IP address is set as default. Having the installer code is the most important part of setting up the system. The installer code is the code that is used to get into the DSC programming mode so you can set the system up and make changes to panel programming. The default installer code for a DSC is 5555.When I connected and scanned using DIS V57 I got the following: DSC - 5F3A DSC: Transfer case: Malfunction DSC - 5F39 DSC: Transfer case. 8hrs) and got the 'terrible triad' of lights (ABS, 4x4, and Brake). I recently took the car on a long run (approx. Hi guys I have a 2008 X3 M Sport 2.0D.You should also write down your master code in a safe place just in case you need to access it. The master code is kept by the installation company in the event that it is needed in the future. The master code is a four-digit code used to arm and disarm the system, as well as for programming additional access codes and changing other features.

Adt dsc impassa installer code